The principle of emulsifying machine：

When the emulsifier is working, after the materials are mixed and reacted in the water pot and oil pot by heating and stirring, they are sucked into the emulsification pot by the vacuum pump, and stirred through the center of the upper part of the emulsification pot. Net hanging on the wall sticks the material, so that the scraped material continuously generates a new interface, and then through the shearing, compression and folding of the blade, it is stirred and mixed to flow to the homogenizer, and the material passes through the high-speed rotating cutting wheel and the fixed During the shearing, impacting, turbulent flow and other processes generated between the cutting sleeves, the material is cut in the shearing seam and quickly broken into particles of 200um-0.2um. The air bubbles were evacuated in time. The vacuuming method is adopted to prevent the products from being mixed with air bubbles during the stirring process, thus ensuring the production of high-quality products with luster, fineness and ductility.

The principle of paste making machine：

The paste making machine is usually equipped with a main pot and two to three auxiliary pots, which are produced by adding materials to the main pot and adding auxiliary materials to the auxiliary pots. The main pot of the paste making machine is usually made of two layers, with special bright light treatment. This machine adopts an upper disperser, so that the material has no dead ends. The dispersion time can be arbitrarily set according to different products. The voltage is 220V, the power is 0.75KW Shanghai Electric Motor, and the speed is 2900. r/min, the dispersing machine is made with modern German technology and has a distinctive structure. The material moves at high speed in the gap between the multi-layer rotor and the stator, forming a strong hydraulic shear, dispersing the material, and at the same time producing centrifugal extrusion, The comprehensive interaction forces such as grinding and collision make the materials fully mixed, stirred and refined to meet the satisfactory requirements. The lid is equipped with an illuminated observation hole to keep abreast of the dispersion status of the products in the pot at any time, and it is equipped with a trace material inlet to facilitate the addition of special flavors. , The operation is convenient to discharge the material from the bottom of the pot, and it can directly enter the filling machine for sub-packaging through the pipeline. At the same time, the material is dumped and discharged, which is convenient for cleaning.

It can be seen that the working principles of the emulsifier and the paste making machine are similar, but the difference is that the main function of the emulsifying machine is emulsification, and the paste making machine changes the emulsification to dispersion.