欧美一级大战黑人_欧美伊人影视9_野外短视频日本一区_高清黄色的网站91_青青国产大帝_我和少妇草比高清无码_日韩中文字幕三级片_在线观看无码国产片_黄色性爱视频久久_不卡av电影在线观看

Hello, welcome to the official website of Shanghai sanhuai International Trade Co., Ltd!

National consultation hotline

+86-021-62411689

Common faults and solutions of automatic capping machine

Author: Click:706 Release time:2020-05-28

With the gradual strictness of our packaging and the continuous changes in packaging, people have also put forward higher demands on the capping machine. The pressure on the capping machine is strictly limited, from simple manual capping to mechanical capping. The automatic capping, high, medium and low-grade products of different levels, meet the needs of customers of different capping.

Pursue the stability of the equipment and continuously improve the automation degree of the equipment, so that our capping ability can serve people better. Extend the trouble-free operation time of our equipment. Make our capping machine more widely used in the whole packaging production line. When people buy capping machines, they look for big manufacturers and the quality of the products.

Today, I will summarize 4 common problems and solutions of automatic capping machines for you.:

1. The failure of the automatic switch caused by the drift of the micro switch or the photoelectric switch, such as the fault can adjust the working position of the position switch or the photoelectric switch, or change the switch.

2. There is no starting current caused by the short circuit between the electric stage winding and the casing and the short circuit between the motor wiring and the ground wire. On the one hand, this fault can check the motor, and at the same time check whether the relevant wires are loose.

3. If the acceleration time setting of the capping machine is too short and the overcurrent fault during acceleration caused by the electric shock capacity exceeding the inverter capacity, the F001 value can be set to an appropriate length, and the capacity of the motor cannot be changed at will.

4. The excessively high voltage during operation caused by the excessive fluctuation of the power supply voltage can be easily solved by adding a reactor to the power input or by appropriately reducing the power supply voltage.

+86-13386259279
  • Wechat:13386259279Wechat QR code