The principle of emulsifier:

When the emulsifier is working, the materials are mixed and reacted by heating and stirring in the water and oil pots, and then sucked into the emulsifier pot by the vacuum pump. The center stirring and polytetrafluoroethylene scraper in the upper part of the emulsifier pot always conform to the shape of the stirring pot, sweeping away the wall sticking materials, so that the scraped materials continuously generate new interfaces. Then, through the cutting, compression, and folding of the blades, they are stirred and mixed to flow to the homogenizer. The materials are then cut in the shear joint by the high-speed rotating cutting wheel and the fixed cutting sleeve, and quickly broken into particles of 200um-0.2um. Due to the vacuum mode inside the emulsifier pot, the bubbles generated during the mixing process of the materials are generated. Was promptly withdrawn. By using vacuum pumping, the produced products are no longer mixed with bubbles during the mixing process, ensuring the production of high-quality products with luster, delicacy, and ductility.

The principle of the paste making machine:

A paste making machine is usually equipped with a main pot and two to three auxiliary pots. The main pot is used to add materials, while the auxiliary pot is used to add auxiliary materials for production. The main pot of the paste making machine is usually made in two layers, with special bright light treatment. This machine adopts an upper disperser to ensure that the material has no dead corners. The dispersion time can be set arbitrarily according to different products. The voltage is 220V, the power is 0.75KW, and the Shanghai motor has a speed of 2900 revolutions per minute. The disperser is made with modern German technology and has a unique structure. The material moves at high speed in the gap between the multi-layer rotor and stator, forming strong hydraulic shear and dispersing the material. At the same time, it generates comprehensive interaction forces such as centrifugal extrusion, grinding, collision, etc., so that the material is fully mixed, stirred, and refined to meet satisfactory requirements The lid of the pot is equipped with a lighting observation hole to keep abreast of the dispersion of the products in the pot. It is equipped with a micro material inlet to facilitate the special essence addition process, and the operation is convenient for the bottom discharge of the pot. Through the pipeline, it can directly enter the filling machine for sub packaging. At the same time, it also dumps the discharge to facilitate cleaning. At the same time, the lid of the pot is also equipped with a lock catch, so that the actual effect of vacuum sealing is better.

Thus, it can be seen that the working principles of emulsifiers and paste making machines are similar, with the difference being that emulsifiers mainly function as emulsifiers, while paste making machines change emulsifiers to dispersers.